UNICOM Electric Unicom Velocity 10/100/1000Base-T 1000Base-SX/LX Gigabit Ethernet Converter GEP-5400TF-C - Manual (Page 3)

Introduction
Congratulations on purchasing a quality UNICOM product.
Unicom’s VELOCITY Series represents the newest, most advanced
generation of signal conversion technology.
Unicom’s Giga Fiber Conver ter is a cost- ef fective solution for the
conversion of 10/100/1000Base-T (Auto MDI/MDIX) and pure 1000
Base-T to 1000Base-SX/LX cabling. It can be slotted into a multi-
conver ter chassis that enhances your network flexibility. It can also be
used as a stand-alone conver ter.
The Giga Fiber Conver ter will allow you to extend the cabling distance of
your 10/100/1000Base-T (Auto MDI/MDIX) or pure 1000 Base-T
network up to 550m for multi-mode fiber or 10 kilometers for single-
mode fiber. This Conver ter uses the most popular fiber cabling
connectors: SC multi- mode fiber connector and SC single-mode fiber
connector.
The Modular Giga Fiber Conver ters provides one Fiber connector for fiber
optic cable and one Ethernet RJ-45 por t (Auto MDI/MDIX) for
10/100/1000Base-T copper cable or pure 1000 Base-T copper cable
connections. There are DIP- switches to set the operation mode for UTP,
Fiber por ts and link lost for warding function.
Product Specifications
Standard Compliance: IEEE 802.3 10/100/1000Base-T Gigabit Ethernet
IEEE 802.3 1000Base-SX/LX Gigabit Ethernet
Protocol: CSMA/CD
Interface: (1) 10/100/1000Base-T, Shielded RJ-45 Jack
(1) 1000Base-SX/LX, Dual SC connector
Cable distance: 10/100/1000Base-T
Cat. 5e or 6: up to 100m.
1000Base-SX: Multi-mode fiber
50/125µm (550m)
62.5/125µm (550m)
1000Base-LX: Single Mode fiber
9/125µm (10Km)
LED Indicators: Power, Speed, Link/Activity (copper and fiber),
Full-Duplex (copper), Full-Duplex/collision (fiber)
Power Supply: External power adapter 9V DC/700mA (min.)
Operating Temperature: 0˚C to 45˚C
Operating Humidity: 10% - 90% RH
EMI: FCC Class A, CE Mark
Enclosure: Metal
Dimensions: 120mm x 85mm x 26mm (L x W x H)
Warranty: Limited Lifetime
FCC Statement
This equipment has been tested and found to comply with the limits for a class B device, pursuant
to par t 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful inter ference in a commercial installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with instructions, may
cause harmful inter ference with radio communications. Operation of this equipment in a
residential area is likely to cause harmful inter ference, in which case, the user will be required to
correct the inter ference at the user’s expense.
9 2