Uniden EXI4560 - Manual (Page 13)

2
) Make sure that the in use/ LED illuminates. If the LED
does not illuminate, check to see that the AC adapter is
plugged in and that the handset makes good contact with
the base's charging contacts.
Note:
• Connect the AC adapter to a continuous power
supply (not controlled by a wall switch).
• Place the base unit close to the AC outlet to
avoid long extension cords.
• Charge your handset at least 15 - 20 hours
before plugging into the phone line.
4) Once the handset battery pack is fully charged, connect
the telephone line cord to the TEL LINE jack and a
telephone outlet. If your telephone outlet isn't modular,
contact your telephone company for assistance.
Modular Modular
Route the cord.