Unified Brands Kitchen Ventilation Systems - Manual (Page 11)

9 avtec.com
INSTALLATION OF ENCLOSURE PANELS
PIECES PROVIDED
Enclosure panels are provided for exposed side(s) of hood(s)
INSTALLATION INSTRUCTIONS
1. Hoods ordered with enclosure panels will be shipped with threaded metal studs
installed on perimeter of hood top where panels are to be installed. Retaining nuts
and washers are installed on the studs prior to shipping.
2. Loosen nuts on studs. Slide enclosure panel under loosened nuts. Holes in panels
are open on end so nuts do not have to be removed.
3. If enclosure panels are installed on one or more hoods butted end to end, the butt-
ing ends of the front enclosure panels should be bolted together.
TOP ENCLOSURES
Fig. 10
Fig. 11 Fig. 12