Univex PowerLite 700 - Manual (Page 31)

Setting Up the Projector 31
Connecting to the VGA Computer Port
You can connect to the projector using a VGA computer cable.
1. Connect one end of a VGA computer cable to the projector’s
Computer (Component Video) port and the other end to your
computer’s monitor port.
2. You may need to change the Input Signal setting in the
projector’s Signal menu to RGB (see page 60).
3. You can connect an optional audio cable to play sound through
the projector (see page 32).
4. You may also be able to use the remote control as a wireless mouse
(see page 48).
When you’ve finished making connections, see page 35 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
caution
Don’t try to force a
connector to fit a port with a
different shape or number of
pins. You may damage the
port or connector.
note
You can purchase a VGA
computer cable from an
electronics dealer.
Computer (Component
Video) port