Universal Electronics URC-3021 - Manual (Page 7)

7
INSTALLING BATTERIES
1. On the remote control’s back, push the tab and lift off the
battery cover.
2. Obtain two (2) new AAA alkaline batteries. Match the +
and – marks on the batteries to the + and – marks in the
battery case, then insert the new batteries.
3. Press the battery cover back into place. The tab should
click when the cover is locked.
4. Test the remote control by pressing any mode key (e.g.,
TV ). If the batteries are inserted correctly, the LED (red
light) will blink.
NOTE: When batteries need replacement, the remote control will stop operat-
ing. Remove the old batteries and insert new ones within 10 minutes to
ensure all of your programming information is restored.
❶
❸
❷
❷
CTGAE3P 3021 manual booklet 5/24/04 12:46 PM Page 7