Uniden LRD 6250SWS - Manual (Page 16)

MEMORY RETENTION FEATURE
The Memory Retention Feature retains the LRD6250SWS/
6275SWS’s operational settings in memory for at least 2 days
without power. When you turn on the LRD 6250SWS/6275SWS, it
will be in the same mode as when you turned it off.
FULL WARNING
When the LRD 6250SWS/LRD 6275SWS detects a radar, laser, or
safety warning signal, it emits a distinct warning tone and the
corresponding alert LEDs ( X, K, Ka, L, SWS or VG2 ) will light
and blink. The blink rate of the LEDs increases and the signal
strength meter LEDs light successively as the signal source comes
closer.
AUDIO ALERT ONLY OPERATION
Press the audio button for Audio Alert Only operation.
When Audio Alert Only is selected, the visual alert and signal
strength meter are disabled. In this mode, all lighted LEDs will
dim. Press the audio button again for the Full Alert (audio and
visual) Mode. Do not set the Volume control at minimum when in
Audio Alert Only because there will be no alert.
14
C:...LRD6250-75SWS-.vp
Mon Feb 01 09:45:13 1999
Color profile: Disabled
Composite Default screen