Uniden 200 - Manual (Page 17)

E-13
1. To listen to International marine channels,
press the
uIC
button. INT
appears on the display. To listen to
Canadian marine channels,
press the
uIC
button again. CAN
appears on the display.
HIGH
INT
2. The radio will keep the last mode
setting that was selected when
turned back on.
3. For USA, International, and Canadian
marine channels and functions, refer to
the tables starting on page 18.
Programming a Channel into Memory
Before scanning, you must have channels
programmed in memory.
1. Press ▲ or ▼ to select a channel.
2. Press
MEM
to store the channel.
MEM appears on the display.
NOTE
You cannot program Channel 70 or any of the weather
channels into memory.
Deleting a Channel from Memory
1. Press ▲ or ▼ to select a channel.
2. Press the
MEM
button. MEM disappears.
Scanning
1. To begin scanning the programmed
channels, press
sCaN
. SCAN and
TRIPLE appear.
2. To stop scanning, press
sCaN
again.
SCAN and TRIPLE disappear
from the display.
HIGH
CAN
HIGH
US
MEM
HIGH
US
HIGH
US
MEM SCAN
TRIPLE