UMAX Technologies Astra 2000U - Manual (Page 53)

UMAX Astra 2000U/P Owner’s Guide
53
Application – sends the scanned item to the applications
specified in the VistaScan Preferences.
E-mail – sends the scanned item as a graphic file to your
Microsoft Exchange or Lotus cc:Mail e-mail application.
Using the Multiple Scan Mode
You can select multiple portions of the image you scanned in
Preview mode using the Multiple Frame tool.
The Multiple Frame tool allows you to create two or more selection
frames in the Preview Window.
To create more than one selection frame:
1. After you have scanned an image in Preview scan mode, click
on the Multiple Frame tool.
2. Select the area you want contained in the first frame by clicking
on the point at which you want to begin the frame, and then
dragging the tool diagonally until the area of interest is
contained in the marquis box.
3. Click outside of a selected area to save the frame. To create
other frames, repeat steps 1 and 2 until you have created all the
desired frames. After you create a frame, the Single Frame tool
is automatically selected so you can resize or move the frame
you just created.