Uniden BT229 - Manual (Page 6)

6
Connect to your phone
Most phones connect to the headset as soon as you pair it; if yours won’t, turn the headset
off and back on. If headset still won’t connect, check your phone’s owner’s manual for
additional Bluetooth information.
Once the headset is paired:
Whenever you turn the headset on, it will automatically try to connect to whatever device it was
connected to last.
If the headset loses the connection (e.g., if your phone is out of range), it should reconnect
automatically. To manually reconnect, press MFB .
Using Your Headset
Turning the
headset on
To turn the headset on, press and hold MFB until the blue LED flashes and
you hear the turn-on melody (about  seconds).
Turning the
headset off
Press and hold MFB until the red LED flashes and you hear the turn-off
melody (about  seconds).
►
►