Uniden TITANIUM 24-148 - Manual (Page 16)

D Do o tth hiiss
Press during a call.
Press or during a call.
Press . The following
numbers will be sent as tone dialing.
Press
. “ P “ appears in the
display which represents a pause.
ª •
B A S I C S [ 14 ]
Making a Call
D Diiaalliin ng g ffrro om m SSttaan nd db byy M Mo od dee
1 1 Enter the phone number.
2 2 Press .
“ Talk “ flashes on the display.
Then current volume setting is displayed.
EExxaam mp pllee:: • Volume Medium
• Volume Medium and Ringer Of f.
3 3 The number is dialed. Af ter about 5 seconds, the call-time
display appears.
4 4 To hang up, press or place the handset on the base.
The call-time will be displayed for about 5 seconds.
• Press if you
enter a wrong number
in step 1.
To delete all the numbers
that you have entered,
press and hold
until the display clears.
• You must press a key
within 20 seconds or the
phone will return to
standby.
TTo o
To improve the reception
To adjust the earpiece volume
To temporarily switch to tone dial
(when the base is set to pulse mode)
To enter a pause within the dialing
sequence
Talk 0:00
8002971023
O Otth heerr O Op peerraattiio on nss
• Refer to terminology
explanation on page 3
if necessary.
5:15
Talk
UC772EZ ENG(24-148) 10/9/01 15:24 Page 14