Uniden EXS 2010 - Manual (Page 22)

20
To attach the beltclip
Insert the beltclip into the holes
on each side of the handset.
Press down until it clicks.
To remove the beltclip
Pull both sides of the beltclip to
release the tabs from the holes.
Your phone may be used with
an optional headset, the Uniden
HS910. To use this feature, simply
plug the headset plug into the
headset jack. Your phone is ready
for hands-free conversation.
headset
jack
Installing the beltclip
Headset installation
ADDITIONAL
INFORMA
TION
If you have wall mounted
the base, you must remove
the beltclip to charge the
handset facing forward.
EXS 2010 6/28/00 4:12 PM Page 24