Uniden CEZ200 - Manual (Page 2)

Connecting the Phone
Test the connection
Pick up the handset and listen for a dial tone. If you don't hear
one, check the connection between the base and the phone jack.
Make a test call. If the dial won't stop when you dial, check the
Tone/pulse switch: if it’s on tone, change it to pulse, and vice
versa. Try your test call again.
If there is static or noise on the line, see the section on Solving
Problems.
1)
2)
Use the coiled cord to
connect the handset
to the base (use the
jack marked with the
handset icon).
Use the telephone
cord to connect the
line jack to a standard
telephone wall jack.
Route the
cord through
the channel.
Route the
cord through
the channel.
Use the coiled cord to
connect the handset
to the base (use the
jack marked with the
handset icon).
Use the telephone
cord to connect the
line jack to a standard
telephone wall jack.
Route the
cord through
the channel.
Route the
cord through
the channel.