Uniden 7500AI - Manual (Page 37)

PROBLEM SUGGESTION
Clock loses time. • The power to the base unit has been
interrupted. Reset the clock as detailed
on page 16 of this owners manual.
CID not being displayed • Make sure that you are subscribing to
Caller ID subscription from your local
telephone company.
Display information is incomplete • This can be caused by power
or frozen interruption. Reset your 7500AI.
TROUBLESHOOTING
34
W
ARRANTY
TROUBLESHOOTING
W
ARRANTY
RESETTING THE 7500AI
If all of the above suggestions do not resolve
your problem, use a straightened paper
clip to press RESET on the back of
the 7500AI to reset the answering
machine.
NOTE: Resetting the 7500AI erases your outgoing messages and all stored information.
Disconnect the telephone line cord before operating the RESET switch.