Uniden UDC-7M - Manual (Page 130)

English
124
Viewing
images
The colors of
the images
captured
indoors are not
correct. This is due to
ambient
lighting. Capture the
image using
the forced flash
mode.
47
The white
balance setting
is incorrect. Set the white
balance setting
correctly.
61
A part of the
image is
missing. The handstrap
or a finger was
blocking the
lens. Hold the camera
correctly, and
make sure the
lens is not
obstructed.
23
“No image” is
shown. There is no
image stored
in the installed
card or the
internal
memory. Play back after
capturing
images.
30, 32
Image
editing
You cannot
edit or rotate
an image. The protect
mode is set. Cancel the
protect mode.
66
Misc.
The “Image is
protected”
message
appears and
the data cannot
be erased. You have
attempted to
erase data that
is protected
from
accidental
erasure. Set the protect
setting for the
data to
UNLOCK.
66
The recording
capacity is less
than that
indicated in the
section
“Possible
Number of
Images/Video
Recording
Time/Audio
Recording
Time”. The recording
capacity is less
than the value
specified for
the card. Depending on
the card, the
capacity may
be less than
the specified
value. Please
refer to the
instructions
that
accompanied
the card.
131
Problem Cause Action
Reference
page