Recording a memo, Using call breakthrough, Changing the cbt code – Uniden 7100A User Manual

Page 16

Advertising
background image

BASIC OPERATION

BASIC OPERA

TION

When a caller enters the CBT code, the DTAM alerts you with loud
beeps for 35 seconds. Then the DTAM sounds two beeps every two
seconds for 30 seconds, and one short beep every second for the
last 5 seconds. To answer the call, pick up the handset. If you
do not answer, the caller can leave a message after the outgoing
message plays and a long beep sounds.

CHANGING THE CBT CODE
The CBT code is preset to 648, but you can change it by following
these steps:
1. Hold down

code set

until the DTAM beeps once appears.

2. Press

The DTAM beeps and

appears followed by the

digits of the preset CBT code in sequence, then the first digit
reappears. For example, when the security code is 648, the
display shows

,

,

, then reappears.

3. Repeatedly press

or

to set the first digit, then

press

. The second digit appears.

4. Press

or

to set the second digit, then press

The third digit appears.

5. Press

or

to set the third digit, then press

.

31

BASIC OPERA

TION

RECORDING A MEMO
A memo is a message you can record by speaking directly into the
DTAM, without having to call in on the phone.

Follow these steps to record a memo up to 60 seconds long.

1. Press

memo

until appears.

The DTAM sounds a long beep and

appears. Speak into the

microphone in a normal voice.
The display counts up the
recording time.

2. The DTAM automatically stops recording after 60 seconds or

after 8 seconds of silence, or you can press button when
you finish the memo. The DTAM beeps once, and the message
number indicator increases by one.

The memo is stored along with the incoming messages. To hear
the memo, simply play back your messages.

USING CALL BREAKTHROUGH
If you screen your calls but want to be sure to know when calls come
in from certain people, give those people your call breakthrough
(CBT) code. Tell them to enter the code during the outgoing message.

BASIC OPERATION

30

NOTE:

Be sure to set each digit within 8 seconds. Otherwise, you must start
over from Step 1.

The DTAM sounds a long beep and announces the CBT code.

3653 Uniden 7100A Booklet 27/7/98 1:09 PM Page 30

Advertising