Priority channel – Uniden UH044SX User Manual
Page 14
PRIORITY CHANNEL
The
feature allows user to monitor one of 40 channels in the
, monitoring it every 1.5secs during
.
Choosing a
The starting channel, when
is initiated, is always the
. To change the priority channel setting while scanning, (eg. PRI
Channel is CH17 (476.825 MHz))
a. press
, to select a higher channel (scanning pauses).
or
b. press
, to select a lower channel
Priority Channel
Group Scanning
Priority Channel
Group Scanning
Priority
Channel
UH-044
(scanning
pauses).
Programming Scan Channels
MEM
MEM
1. Select which Scanning Mode you wish to use
on the channel OS or GS Mode.
2. Select the channel you want to store by
pressing
or
.
3. Press
to store.
icon appears.
4. To remove the channel from Memory, press
to remove.
icon disappears.
Note:
OS is indicated by the absence of the GS icon
mem
dup
scan
tx
pwr
os/gs
mem
dup
scan
os/gs
11
mem
mem