UTStarcom Handset - Manual (Page 36)

Tools
28
7. TOOLS
7.1 Alarm
To set an alarm:
1. Press [Menu] , .
2. To set a new alarm, choose [Empty] and press
[Select]. Edit the date and time by pressing the digit
keys. Press or to edit the other fields.
3. Press or to change the value in each
field. Press [Save] to save the alarm.
4. To edit an existing alarm, press [Edit]. Follow
instructions for setting up a new alarm. To delete the
alarm, press [Del].
!
Note: The phone does not provide a clock IC, but displays the date
and time based on the information from the digital CDMA network.
Therefore, the date and time will not be displayed, while the phone is
out of the service area or operates in the analog mode after the
phone is turned on. The clock and schedule alarms will not work if
the date and time are not displayed.