Ultratec Miniprint 425 - Manual (Page 29)

2. Press the key until you see TURBO CODE ( ON) on
the display.
3. Press the to change the setting to OFF.
4. Press the key to save the new setting and leave
options or press the key to save and go to the next
option.
Turning off Auto ID
Follow these steps to turn off Auto ID:
1. Press the options key ( + ).You will see PRINT
(UP/LOW) CASE on the display.
2. Press the key until you see AUTO ID (ON) on the
display.
3. Press the to change the setting to OFF.
4. Press the key to save the new setting and leave
options or press the key to save and go to the next
option.
Turning off interrupt
Follow these steps to turn off interrupt:
1. Press the options key ( + ).You will see PRINT
(UP/LOW) CASE on the display.
2. Press the key until you see INTERRUPT (ON) on the
display.
3. Press the to change the setting to OFF.
4. Press the key to save the new setting and leave
options or press the key to save and go to the next
option.
Return
Esc
Spacebar
Return
3 Ctrl
Return
Esc
Spacebar
Return
3 Ctrl
Return
Esc
Spacebar
Return
O P T I O N S • 2 7