Uniden TRAX325 - Manual (Page 11)

Page 11
How Do I Put It in My Car?
Mounting on the windshield
Make sure the device does not block your view of the road or
your mirrors.
Once you decide where you want the device, hold the suction cup in that
position, then adjust the mount so you have the best view of the device.
1) Press the suction cup flat against the windshield.
Push the suction lock up 2)
(towards the suction cup)
until it snaps into place.
Gently pull on the mount to 3)
make sure it is secure.
If you have trouble getting the
suction cup to stick:
Clean the spot with an ►
ammonia-free cleanser.
Dry the spot completely (use
►
a lint-free cloth, if possible).
Make sure the spot is smooth
►
and flat (suction cups won’t
stick well on a curved or textured surface).
R
emovinG The WindShield mounT
When you release the suction latch, make sure you’re holding or
somehow supporting the device.
Lift the suction latch and use the plastic pull tab to pull the suction cup off
of the glass.
Flip the suction
latch up to lock
the windshield
mount into place.