Unitech PA966 - Manual (Page 15)

11
PA966/967 User's Manual
Software Keyboard (Windows CE Keyboard)
In addition to the 966’s alphanumeric keypad, Windows CE provides a touch screen keypad in
QWERTY format.
Closing the Keyboard:
Tap the keyboard icon to close the Windows CE keyboard.
Moving the Keyboard:
Use the stylus to point to the title bar (the bar displaying “Input Panel”)
and then move the stylus without lifting it from the screen.
International Character Support:
Tap the [áü] button to switch from the standard English keyboard to the
European keyboard.
Useful Hotkeys
The PA966 provides eight combination hot keys to activate specified screen setting functions or
programs. These hotkeys are useful for toggling the backlight and adjusting screen contrast when
the menu-driven operation is disabled. Below is the list of hotkeys. To use them, press and hold the
[FUNC] key in combination with the corresponding second key.
Func + 7
Func + 8
Func + 9
Func +
Func +
Func +
Func +
Scanner setting
Power status
System information
LCD backlight on/off
Keypad backlight on/off
Display brightness - increase
Display brightness - decrease
Keying-in Characters:
After tapping the “keyboard” icon, the Windows CE keyboard pops up.
Character input is the same as on a standard PC. Simply tap the on-screen
button corresponding to the character you want to input.
Opening the Windows CE Keyboard:
The Windows CE keyboard can be opened by tapping the keyboard icon
on the task bar. (Refer to picture at right).