Uniden TRU9488 - Manual (Page 18)

7
Installing.the.Belt.Clip
Line.up.the.holes.on.each.side.of.the.handset..To.attach.the.belt.clip,.insert.into.the.holes.on.
each.side.of.the.handset..Press.down.until.it.clicks..
To.remove.the.belt.clip,.pull.either.side.of.the.belt.clip.to.release.the.tabs.from.the.holes.
Connecting.to.the.Phone.Line.
Once.the.handset.battery.pack.is.fully.charged,.connect.the.
long.telephone.line.cord.to.the.TEL.LINE.jack.and.to.a.tele-
phone.outlet..
Testing.the.connection
To test your connection, try making a call. If your call connects, the settings are fine. If your call does not connect,
check.the.following:
Check.the.AC.adapter.cord..Make.sure.it.is.securely.connected.to.the.DC.IN.connector.and.to.a.standard.AC.
power.outlet.
Check.to.make.sure.the.battery.is.fully.charged..(If.you.don’t.see.the.“battery.full”.icon,.check.to.make.sure.
the.battery.is.properly.connected.)
Change.dial.mode.(instructions.on.page.8).
)
2)
)
2)
3)