Support – USRobotics Wireless 54Mbps ADSL Router User Manual
Page 12
8
English
Note: Ad-hoc mode is used for peer-to-peer network configurations.
infrastructure mode is used for integrated wireless and wired LAN
configuration.
My computer does not recognise the wireless function of the Wireless
54Mbps ADSL Router after I changed the settings.
Possible Solution:
Ensure that you are connecting to the correct Wireless 54Mbps ADSL Router
by verifying the correct MAC address. Ensure that the correct passphrase and
encryption option are being used. If you changed the settings in the
configuration of the Wireless 54Mbps ADSL Router, you must also change the
settings of every wireless adapter attached to this network. The settings of the
wireless adapters must match the new settings of the Wireless 54Mbps ADSL
Router.
I cannot achieve 54Mbps connections to the Wireless 54Mbps ADSL
Router.
Possible Solution:
Make sure the wireless products you are using to connect to the Wireless
54Mbps ADSL Router support 54 Mbps speeds. 54 Mbps wireless products
must be used in order to connect to the Wireless 54Mbps ADSL Router at a
rate of 54 Mbps. Launch the router’s Web User Interface and manually set the
connection speed to 54 Mbps.
Possible Solution:
Low connection speed or range can also be caused by environmental
interference. Try to move the product around to improve the link quality. In
addition, keep in mind that other factors such as lead based paint, concrete
walls, and electronic items such as 2.4G phones may affect your wireless
range.
Support
To obtain additional support for your router:
1.
Know your model and serial number.
Your model number is 9110. You can find your serial number on the side of
the package and on the bottom of the router.
2.
Go to the Support section of the U.S.Robotics Web site at
.
Model Number Serial Number
9110