Uniden D1364 - Manual (Page 8)

8 - English
To... Press...
add 1 at the front of CID number
*
before dialing for a toll call.
add the area code # before dialing.
store the current CID or redial entry
to the phonebook
MENu/SELECT , then select Store Into PB.
Proceed to edit the name and number.
edit the current phonebook entry MENu/SELECT , then select Edit.
delete the current entry
MENu/SELECT , then select Delete (or
Delete Entry). To confirm, select Yes.
close the list phONEBOOk/LEFT .
# When it’s in standby, the handset shows how many calls came in
since the last time you checked the CID list.
Adding Phonebook Entries
With the phone in standby, open the phonebook. Press MENu/SELECT and then
select Create New. Proceed to enter a name and number.
x Enter the phone number (up to 20 digits) exactly as you would dial it.
x If you need to enter a pause between the numbers, press rEdIAL/pAuSE ; you’ll
see a P in the display. (The dialing will pause for about 2 seconds per a digit.)
x To edit the number, press CLEAr to back up the cursor and delete numbers.
Re-enter the correct numbers.
Deleting All the Entries
With the phone in standby, open the list (phonebook, CID, or redial). Press MENu/
SELECT and then select Delete All. To confirm, select Yes.
Chain Dialing
If you often have to enter a series of digits or a code number during a call,
you can save that code number as a regular phonebook entry and use the
phonebook to send the code number.
Make a call normally. When you hear the prompt that asks you to enter your
number, open the phonebook and find the entry. Press MENu/SELECT to send
the code. If you change your mind, just close the phonebook.
Using Call Waiting
x Call Waiting, a service available from your telephone provider, lets you
receive calls while you are on another call. Caller ID on Call Waiting
(CIDCW) service displays Caller ID information for a waiting call.
x If you get a Call Waiting call, the phone sounds a tone. Press TALk/FLASh to
switch between the current call and the waiting call; each time you switch,
there is a short pause before you’re connected to the other caller.