Uniden UA466ZL - Manual (Page 6)

4
Controls and Indicators
1. SCAN/MEM - Select Scan mode and setup Memory channels.
Press this key to activate the Scan operation. Press and hold this
key for 2 seconds to place a channel into Scan Memory or remove
a channel from Scan Memory.
2. POWER/VOL - This is to control the wireless mic power and
speaker volume.
3. ▲/▼ - Change the channel number up/down. These buttons are used to
adjust the volume for Hail mode and to move the cursor in Menu mode.
4. MENU/HAIL - It is used to access the Menu. Press and hold the
key for 2 seconds to activate the Hail feature.
5. Microphone
6. DISTRESS - Send a signal of distress in case of emergency.
7. WX/ALERT - Select Weather Channel and Weather Alert mode.
Press this key to listen to active NOAA Weather Channels.
Press and hold this key for 2 seconds to place the radio into the
Weather Alert mode.
8. 16/9/TRI - Instantly change to Channel 16, Channel 9, and Triple
Watch mode.
9. H/L/SELECT - Change transmit power HI/LO and make selections in
the menu. Press this key to change the transmit power to either High
or Low.
10. LIGHT/LOCK – Change the LCD backlight HI/MID/LO, and turn the
Key Lock On/Off.
11. PTT (Press – to – talk) Switch - Press to transmit and release to
receive.
12. Belt Clip
13. Battery Compartment Lock
14. Battery Cover
11
12
13
14
10
6
2
3
7
9
8
1
4
5
WHAM_UA466ZL UA01466ZA_0 9/20/02 12:50 PM Page 4