Universal Remote Control (URS) RF30 - Manual (Page 4)

6 5
Activating Component Commands
GETTING ST
AR
TED
LIGHT BUTTON
GETTING ST
AR
TED
Once you’ve programmed
RF30 for your Components,
all you have to do to oper-
ate a specific Component is
first, press the MAIN button.
This will display Page 1 of
the MAIN menu on the LCD
touch screen. Page 1 of the
MAIN menu displays seven
Components, plus FAV
(Favorite Channel). Then,
simply select the
Component you want to
operate by pressing the
desired Component display
button on the LCD Touch
Screen. As an example, if
you press the TV display
button, the display label at
the top of the screen will
change from MAIN to TV,
and all the buttons on RF30
will work your TV. To oper-ate
another Component,
simply press the MAIN
button again to return to
Page 1 of the MAIN menu and select the next
Component you want to
operate.
If you don’t see the
Component you want to
control on Page 1 of the
MAIN menu, just use the
PAGE ( ) ( ) display buttons
at the bottom of the screen
to bring up Page 2 of the
MAIN menu which displays
an additional eight
Components.
Each Component is provided
with four pages of pre-
labeled command display
buttons (or space for addi-
tional command display but-
tons). Once again, simply
use the PAGE ( ) ( ) display
buttons to take you to the
next command page, or
return you to the previous
command page.
Activating Component Commands –
Simple, Easy, Intuitive
Light Button
The fully backlit keypad makes the RF30 easy to use in the
dark or dim lighting conditions. Simply press the LIGHT
button to backlight all the keypad buttons and LCD touch
screen. To turn off the backlight, press the LIGHT button
again, or just wait ten seconds (the backlight automatically
shuts itself off). Lights out!
Try it out!
TV DISPLAY
BUTTON
FAV
BUTTON
PAGE
BUTTONS
MAIN
BUTTON
LIGHT
BUTTON