Ultimate Ears UE4 0000-0 - Manual (Page 3)

How to wear your earphone monitors. How to care for your earphone monitors.
Step 1
Identify Right and left monitors. Red
initials indicate Right. Blue = Left.
Step 1
Hold your earphone monitor with
the bore holes facing down. Use the
cleaner wire to gently scrape any
debris from the bore holes.
Step 4
If necessary, gently tug and wiggle
around the outer edge of the ear and
adjust the monitor to ensure a secure
fit and seal.
Step 4
Gently and loosely wrap the cable
around three fingers as shown
above. Be careful not to bend
stiffener wire.
Step 2
Orient monitor with cable forward as
seen above. Insert monitor gently,
but securely in ear canal.
Step 2
Hold the earphone monitor with bore
holes facing down. Use the brush to
clean any remaining debris.
Step 5
Adjust the strain reliefs over and
behind the ear until comfortable.
Step 5
Protect your earphone monitors by
storing them in the protective metal
case.
Step 3
Rotate the monitors back until they
lock into your ear.
Step 3
Use an antiseptic towellete to clean
off outer housing.
Step 6
Slide the cinch up to the back of the
head until it is secure.
2 ,
UE4 0000-0
UE4 0000-0
0ATENT    0ATENT