Setting channel delay – Uniden UBC340CRS User Manual
Page 24
Advertising
Setting Channel Delay
You can set the scanner to pause for seconds at the end of a
transmission on a memory. This is useful to help prevent missed replies.
Delay is turned on by default when you program a memory. To turn Delay
off (or back on), first, select the channel. Then, press
DELAY.
The scanner turns on the
DELAY
icon for memories that have been
programmed with delay.
Using the Scanner Memories
UBC40CRS OM.indd
7/5/08 4:8:0 PM
Advertising