Setting the function mode – Uniden UBC-RH96 User Manual
Page 22
22
Setting the Function Mode
If you scroll to the Handy Option menu, you can
highlight
Set Func Mode
Set Func Mode
.
Select this to choose between
Set Hold Timer
Set Hold Timer
and
Set Auto Release
Set Auto Release
.
Setting Hold Timer
When you select this option, you can scroll through
and select from fi ve settings. The setting determines
how long the knob acting as the FUNC control is
enabled each time you press it if you do nothing else.
The fi ve settings are:
Off:
Function mode is continuously enabled only
while pressing the Control or SQ knob.
3 sec: Function mode is enabled for 3 seconds after
releasing the Control or SQ knob.
5 sec:
Function mode is enabled for 5 seconds after
releasing the Control or SQ knob.
10 sec: Function mode is enabled for 10 seconds after
releasing the Control or SQ knob.
Infi nite: Function mode is enabled until the Control or
SQ knob is pressed again (default).
UBC-RH96 Digital Scanner OM.indd22 22
UBC-RH96 Digital Scanner OM.indd22 22
10/9/07 4:16:04 PM
10/9/07 4:16:04 PM