Uniden 2315+2 - Manual (Page 25)

[ 19 ]
System Reset
De-register the Handset
1) Enter the System Reset menu, and then the Deregister
HS submenu (see “Entering the Menu” on page 13).
2) Press /vol/ or /vol/ to select the handset
ID to be de-registered from the list, and then press
. Deregister HS? appears.
3) Press /vol/ or /vol/ to select Yes.
4) Press . You will hear a confirmation tone.
When de-registration is complete, Deregistration
Complete appears.
5) After de-registering the handset, move to “Replacing the
Base Setting” below.
Replacing the Base Setting
1) Enter the System Reset menu, and then the Replacing
Base submenu (see “Entering the Menu” on page 13).
Replace base? appears.
2) Press /vol/ or /vol/ to select Yes.
3) Press . You will hear a confirmation tone.
The base information will be deleted.
When replacing the base is complete, Place handset on main base to
register appears, register the handset to the new base (see page 44).
Make sure to perform
the Replacing Base
after de-register
the handset.
Deregister HS?
Yes
No
Which Handset?
Handset #1
Handset #2
Replace base?
Yes
No
UP409ZH (WDECT2315-2) OM 12/22/05 3:27 PM Page 19