Uniden uh078sx - Manual (Page 11)

11
Mount the Hang-Up Bracket
Use the radio Hang-up Bracket when charging the uh078sx Deluxe with the
Cigarette Lead Charger in a vehicle.
The radio Hang-up Bracket comes in two parts. How and where you choose to
mount the Hang-up Bracket will determine which parts to use.
Conventional Mounting with Screws
Use the front part of the Hang-up Bracket only.
Locate a suitable mounting position in the vehicle and mark and drill two 3mm
holes.
Fix the Hang-up Bracket into place with screws.
Conventional Mounting with Double Sided Tape
(not supplied)
High quality Double-Sided tape can be found at good retail stores.
Secure the front and back pieces of the Hang-up Bracket using the supplied
binding screws. Locate a suitable mounting position.
Apply high quality Double-Sided tape onto the flat area of the Hang-up Bracket
back piece and then press firmly to the mounting position.