plawa-feinwerktechnik GmbH & Co.KG DC-735 - Manual (Page 40)

- 39 -
Choosing a Startup Image
You can choose a recorded image as the start-up image.
1. Set the camera to the Playback mode
2. Press or to select a desired image.
3. Press the MENU button, then press or to select
S.IMAGE ( ).
4. Press or to select an option, and then press the
SET button.
5. Set the camera to the Setup Menu
6. Press or to select S.IMAGE ( ) then press or
the SET button.
7. Press or to select a desired image and press the
SET button to apply the setting.
yWithout setting images in step 4, only default startup
image can be selected.
8. Press the MENU button to close the menu.
Formatting the Memory
To erase all data stored in the memory card if you are using a card, or all data stored in the
internal memory if there is no card inserted.
1. Set the camera to the Setup Menu
2. Press or to select FORMAT ( ) then press or the SET button.
3. Press the SET button to start format, or press the MENU button to cancel it.
yA “BUSY...PLEASE WAIT” message displays and the memory card is starting format.
yA “COMPLETED” message displays when finish formatting.
NOTE:
yAll data will be deleted including protected ones. Be sure to download important files to
your computer before formatting.
NOTE:
yThe start-up image will not be deleted even if the original image is deleted or memory
formatted.