Uniden BC60XLT - Manual (Page 16)

Setting the Squelch
1. Turn until hiss heard.
This action lowers the
“squelch gate,” allowing
all signals and noise to
get through.
No signal should be
present when adjusting
squelch.
Scanner doesn’t scan
with squelch open.
2. Turn just until hiss stops.
This action raises the
“squelch gate,” allowing
only strong signals to get
through.
Scanner should begin
scanning after two
seconds.
Note: You must have at
least one channel
programmed before the
BC60XLT will scan.
Scanning Programmed Channels
Turn the scanner on.
Channel numbers
advance rapidly.
Note: When you turn the
scanner on, it will always
be in Scan mode.
13
H:...Bc60xlt.vp
Mon Aug 30 15:34:06 1999
Color profile: Disabled
Composite Default screen