Uniden UDC-5M - Manual (Page 96)

English
90
OTHER DEVICES AND CONNECTIONS
CONNECTING TO A TV
Connect the supplied Video Cable from the USB/VIDEO terminal on the
digital camera to the VIDEO input terminals on the TV.
Playback
i After connecting the digital camera to the television, set the TV input switch
to VIDEO input.
i When a Video Cable is connected, no image appears on the camera’s
monitor.
i The playback method is the same as when viewing images on the
camera’s monitor.
CAUTION
Insert and pull out the cable carefully.
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
USB/
VIDEO
To the VIDEO input
terminal To the USB/
VIDEO
terminal
Switch input to VIDEO
Supplied Video
Cable
USB/VIDEO
terminal
Open