Making and receiving calls – Uniden XS1210 User Manual

Page 6

Advertising
background image

Making and Receiving Calls

Making a call

Receiving a call

Hanging up

Redialing the last dialed number

Ringer tone and volume

Earpiece volume

Temporarily Mute Ringer

Travelling Out-of-Range

Selecting a Different Channel

1. Remove the handset from the base.

2. Press the

key. The

LED flashes and turns on.

3. Listen for the dial tone.

4. Dial the number.

If the handset is in the base, simply remove the handset from the base. AutoTalk will

automatically answer the call.

If the handset is off the base, press the

key or any number key.

Press the

key or return the handset to the base.

1. Remove the handset from the base.

2. Press the

key. The

LED flashes and turns on.

3. Listen for the dial tone.

4. Press the

key.

If a call waiting tone sounds while you are on a call:

Australia:

Press

to switch

between callers.

New Zealand: Press

to switch between callers.

When the phone is in standby mode, press the

key repeatedly to listen to the

four ringer tones and volume combinations. The last ringer tone heard will be

selected as the phone’s ring tone setting.

The handset earpiece volume settings (low, medium and high) can only be adjusted

during a call. Use the

key to scroll through the volume levels and select the

one that works best for you. When you hang up, the phone keeps the volume

setting.

If the handset is off the base, simply press the

key to temporarily mute the

incoming ring. The ringer will sound with the next incoming call.

During a call, as you begin to move your handset too far from your base unit, noise

increases. If you pass the range limits of the base, your call will terminate within one

minute.

If you encounter interference while using your phone, you can manually change the

phone’s channel for clear operation. This function works only when the phone is in

use. Press the

key. The

LED flashes, indicating the phone is

changing to another channel.

talk

talk/batt low

talk

end

talk

talk/batt low

redial/pause

Rocketdial/call wait
flash

NOTE:

vol/

vol/

end

channel

talk/batt low

You must subscribe to call waiting through your telephone company.

Flash and Call Waiting

Adjusting the Ringer and Earpiece Volume

[5]

Advertising