Uniden DMX 778 Series - Manual (Page 67)

A n s w e r i n g M a c h i n e [ 6 6 ] w w w . u n i d e n . c o m
Answ
ering Machine
4) Enter a command from the following chart within 15
seconds. After the first command, you have two seconds to
enter each command.
* For the Repeat a Message function, press 0 then 1 within
about 2 seconds to repeat the previous message, or press 0
then 1 after about 2 seconds to repeat the current message.
** The first time you enter the Memo Record or the Greeting
Message Record command, the answering machine will start
recording. Enter the same command again to stop recording.
5) After the command has finished, you hear intermittent beeps
indicating that the system is in the command waiting mode.
You can enter another command from the chart, or you can
hang up to exit the system.
6) When you hang up, the answering machine automatically
returns to standby.
Command Function Command Function
0 then 1 Repeat a Message* 0 then 6 answering machine On
0 then 2 Play incoming Messages 0 then 7 Memo Record/Stop**
0 then 3 Skip a Message 0 then 8
Greeting Message Record/
Stop**
0 then 4 Delete a Message 0 then 9 answering machine Off
0 then 5 Stop Operation 1 then 0 Help
UP720.book Page 66 Wednesday, October 6, 2004 1:21 PM