Fitting load carriers, 06 starting and driving – Volvo S60 S60R User Manual

Page 144

Advertising
background image

06 Starting and driving

143

Load on the roof

06

Fitting load carriers

Make

sure the load carrier is fitted in the

right direction (see the marking on the
decal under the cover).

– Fit the guide pins into the guide holes (1).

– Carefully lower the bracket on the other

side to the roof.

– Screw the knob up a bit.

– Press the knob against the roof bracket

and catch the hook in the roof bracket
under the roof rail.

– Screw the load carrier in place.

– Fit the guide pins of the other brackets

into the guide holes.

– Screw the load carrier in place.

– Check that the hook is properly secured in

the roof bracket.

– Tighten the knobs alternately until the car-

rier feels secure.

– Replace the cover.

– Check that the roof rack is properly se-

cured.

NOTE

Check the knobs regularly to see that they
are properly tightened.

Advertising