Battery maintenance, Figure 10 – VeriFone 8000 User Manual

Page 19

Advertising
background image

S

ETUP

Connecting the Battery

NURIT 8000 I

NSTALLATION

G

UIDE

19

4

Lift and remove the battery.

Figure 10

Removing the Battery

5

Replace the battery/card compartment cover. See

Figure 4

.

Battery Maintenance

The supplied high-performance smart Lithium-polymer battery provides 7.4

VDC at 1800 mAH (minimum) capacity.

When fully discharged, the battery fully recharges within three hours while

installed in the terminal. An 80% charge capacity is reached within one hour.

The terminal can be connected to an AC/DC power supply indefinitely without

causing damage to the battery pack.

In typical use, the life span of the battery exceeds 500 charge cycles, after

which, operating time decreases slowly.

The battery pack has a self-discharge rate. It loses approximately 1% of its

charge per day when not in use. Replace the battery pack when the charge
capacity is too weak for normal operation.

Remove the battery pack from the terminal if you do not intend to use your

NURIT 8000 for an extended period of time.

CAUTION

Take care when installing the battery pack. If it is installed incorrectly, it may

explode. Use only a VeriFone supplied battery.

CAUTION

When using the VeriFone-supplied AC/DC power adapter, the Lithium-polymer

battery must be installed in the terminal.

WARNING

Do not break open, or separate the battery.

WARNING

Do not dispose of the NURIT 8000 Lithium-polymer smart battery in a fire.

LIthium-polymer batteries must be recycled or disposed of properly. Do not
dispose of Lithium-polymer batteries in municipal waste sites.

Advertising