Vivitar 3D DIGITAL CAMCORDER DVR 790HD User Manual
Page 21
20
Image Sharpness Menu
(2D Image Capture only)
You can set the level of sharpness in the images taken with your camera. The sharpness level
dictates if the edges of objects in the image are more or less distinct.
1)
Press the SET button to open the menus for the current mode.
2)
Push the joystick button LEFT or RIGHT to scroll and select the Image Sharpness menu.
3)
Push the joystick button UP or DOWN to scroll through the menu options.
4)
Press the SET button to select and save the desired option.
5)
A
selected option icon will appear on the selected item.
6)
Push the joystick button LEFT or RIGHT to select the next menu item.
7)
Press the MODE button to exit the menu and return to your previous mode.
8)
An icon reflecting your selection will display on the LCD screen
9)
Remember that this setting will be saved by your camera until you manually change the
setting or restore the camera‟s default factory settings.
Light Exposure Menu
(3D and 2D Image Capture)
The Light Exposure setting helps you control the amount of light that enters your camera‟s lens.
This setting should be adjusted when the environment is lighter or darker than normal.
When the environment has more light than is needed, reduce the exposure setting (by using the
negative - count) to reduce the amount of light allowed into the lens by your camera.
If the environment has less light (darker) than is needed, increase the exposure setting (by using
the positive + count) to increase the amount of light allowed into the lens by your camera.
1)
Press the SET button to open the menus for the current mode.
2)
Push the joystick button LEFT or RIGHT to scroll and select the Light Exposure menu.
3)
Push the joystick button UP or DOWN to scroll through the menu options.
4)
Press the SET button to select and save the desired option.
5)
A
selected option icon will appear on the selected item.
6)
Push the joystick button LEFT or RIGHT to select the next menu item.