VistaQuest VQ-7024 - Manual (Page 27)

- 23 -
[TV Output]
Push the joystick left and right to set the TV Output .
NTSC Setting the TV Output to NTSC.
PAl Setting the TV Output to PAL.
[Auto Power Off]
Push the joystick left and right to set the time of auto power off .
30SEC Setting the camera automatically powers off approximately 30 seconds.
1MIN Setting the camera automatically powers off approximately 1 minute.
3MIN Setting the camera automatically powers off approximately 3 minutes.
5MIN Setting the camera automatically powers off approximately 5 minutes.
[Light Freq.]
Push the joystick left and right to set light frequency.
Setting the flicker frequency to 50 Hz.
Setting the flicker frequency to 60 Hz. (*)
[Default Setting]
Press OK button to turn on the submenu and then press OK button again to confirm or press
Menu button not to return to default setting.
[System Info.]
Press OK button to see the version and then press Menu button return to main menu.