Venturer STB7766G - Manual (Page 16)

- 15 -
ON-SCREEN MENU - OPTION
DCC View
1. Press the MENU button on the remote control.
2. Use the / buttons to select the OPTION menu.
3. Use the button to select DCC View then press the
ENTER button or the button.
4. Use the / buttons to select the options, then use
the / buttons to make adjustments.
Use this to set the character font. Only DCC (Digital Closed Caption) is set to Custom, DCC View
is activated.
Sleep Mode (Power Save Mode)
1. Press the MENU button on the remote control.
2. Use the / buttons to select the OPTION menu.
3. Use the button to select Sleep Mode then press the
ENTER button or the button.
4. Use the / buttons to select the options
(Off / 1 hour / 2 hours / 4 hours / 8 hours).
This product is currently set to Power Save Mode (Sleep mode). It will not rececive TV signal after
4 hours of inactivity.
DCC View
DCC View
Notes:
•
To activate DCC View, DCC on Caption Select should
be set to ‘Custom’.
ON-SCREEN MENU - LOCK
1. Press the MENU button on the remote control.
2. Use the / buttons to select the LOCK menu.
3. Use the button to position the cursor on the input fi eld and enter password. If you have not
specifi ed the password, input the factory-default code, “0000”.
4. Use the / buttons to select Lock System then press the ENTER button or the button.
5. Use the / buttons to select On/Off.
Lock System
RRT RRT
811-776691W012.indd 15 811-776691W012.indd 15 12/18/2008 10:40:36 AM 12/18/2008 10:40:36 AM