VTech VT6221 - Manual (Page 23)

22
20401551en_ba_a0
Direct call (baby call)
With direct call, you can program a number which can be directly dialled when any key
(except the programming key) is pressed.
Entering/editing the direct call number
Press the programming key.
Press 3.
Enter your four-digit PIN.
Press the programming key.
is displayed. Delete individual digits backwards by pr essing
the
key. Hold down the key to delete the entire number. You
can add a dialling pause between two digits by holding down the «0» key.
Enter the number which is to act as the direct call number.
Press the programming key to save the setting.
Telephone settings
Z
Z
PROGRAM
PROGRAM
PROGRAM
CLEAR CLEAR
If the Direct call number has been programmed, this number
Activating/deactivating direct call
Press the programming key.
Press 2.
Enter your four-digit PIN.
Press the programming key.
If direct call was deactivated, this activates it. If direct call was activated, this
deactivates it.
Press the programming key to save the setting.
If direct call is activated, the direct call number is displayed in the handset.
Z
PROGRAM
PROGRAM
PROGRAM