VTech DS6111 - Manual (Page 37)

www.vtechphones.com 33
Appendix
Battery
It takes up to 16 hours for the battery to be fully charged. When it is fully charged, you can expect the following performance:
Operaton Operatng tme
Whle n handset use (talkng*) Nne hours
Whle n speakerphone mode (talkng*) One and a half hours
Whle not n use (standby**) Fve days
*Operatng tmes are approxmate. Your results may vary.
**Handset s off the telephone base but not n use.
The battery needs chargng when:
A new battery s nstalled n the handset.
The handset beeps.
LOW BATTERY is displayed and the battery indicator on the handset screen is flashing.
CAUTION:
To reduce the risk of fire or injury, read and follow these instructions:
Use only the battery(es) provded or equvalent. To order a replacement, vst our webste at www.vtechphones.com or call 1 (800) 595-9511.
In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377.
Do not dispose of the battery(ies) in a fire. They may explode. Check with local waste management codes for special disposal
nstructons.
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause burns or injury to the eyes or skin. The electrolyte
may be toxc f swallowed.
Exercse care n handlng batteres n order not to create a short crcut wth conductve materals such as rngs, bracelets, and keys. The
battery and/or conductor may overheat and cause burns.
Charge the battery(ies) provided with or identified for use with this product only in accordance with the instructions and limitations specified
n ths manual.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO WATER OR ANY TYPE OF MOISTURE.
•
•
•
•
•
•
•
•