Changing the tv settings, Setting the tuner mode, Scanning for channels – Vizio E420VP User Manual
Page 26: Setting the tuner mode scanning for channels
18
5
E370VP / E420VP
Changing the TV Settings
Using the TV settings menu, you can:
• Set up the TV tuner
• Name the TV inputs
• Set up parental controls
• Change the on-screen menu language
• Set the time
• Adjust the CEC settings
Setting the Tuner Mode
If you are using a device that is connected to the RF input, such as an external
antenna or cable TV connection, you must set the tuner mode.
This setting is only available when viewing the TV input.
1. Press the
MENU button on the remote. The on-screen menu is displayed.
2. Use the
Arrow buttons on the remote to highlight the TV Settings icon and
press
OK. The TV Settings menu is displayed.
3. Use the
Arrow buttons on the remote to highlight Tuner Settings and
press
OK. The Tuner Settings menu is displayed.
4. Highlight
Tuner Mode and press OK. The Tuner Mode menu is displayed.
5. Highlight
Antenna or Cable and press OK.
6. Press the
EXIT button on the remote.
Scanning for Channels
Before the TV can detect and display channels and their associated information,
you must scan for channels. A channel scan may also be necessary when the
TV has been moved to an area where different free-to-air broadcast television
channels are available.
This setting is only available when viewing the TV input.
1. Press the
MENU button on the remote. The on-screen menu is displayed.
2. Use the
Arrow buttons on the remote to highlight the Settings icon and
press
OK. The TV Settings menu is displayed.
3. Highlight
Auto Channel Scan and
press
OK. The auto channel scan
begins.
4. Wait until the channel scan is 100%
complete. Highlight
Done and press
OK.
5. Press the
EXIT button on the remote.