Vizio VIZIO - Manual (Page 19)

VIZIO VX32L HDTV20A User Manual
Version 5/20/2008
www.VIZIO.com
19
2.4
Connecting Your Basic Set-Top Box
2.4.1
Using Composite Video
1. Turn off the power to the HDTV and Set-Top Box.
2. Using the AV Cable, connect the Video (yellow color)
connector on your Set-Top Box to the corresponding Video
(yellow color) connector in the AV1 group (yellow color
area) at the rear of the HDTV.
3. Using the white and red connectors, connect the cable to
the audio output connectors associated with the Video
output on your Set-Top Box and connect the other end to
the audio connectors associated with the AV1 input
(yellow color area) at the rear of the HDTV.
4. Turn on the power to the HDTV and Set-Top Box.
5. Select AV1 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the AV button on the Remote Control.
6. If AV1 input is being used, use AV2 as the input and follow steps 1 through 4; and then select
AV2 in step 5.
2.4.2
Using Coaxial (RF) Input
1. Turn off the power to the HDTV and Set-Top Box.
2. Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your
Set Top Box and the other end to the DTV/TV input at the rear of the
HDTV.
3. Turn on the power to the HDTV and Set-Top Box.
4. Select TV using the INPUT button on the remote or side of the HDTV, or directly by pressing
the TV button (below the GUIDE button) on the Remote Control.
Note: Refer to your Set Top Box user manual for more information
about selecting the video or RF output of the product.