Using vistarad in a routing system, Displaying routed exams, Routing gateway menu options – Vista Imaging Vista Routing User Manual
Page 67
Using VistARad in a Routing System
This chapter explains how to use the VistARad diagnostic workstation software at sites
that are part of a routing system. This chapter covers the following topics:
Displaying Routed Exams
In VistA Imaging, the VistARad diagnostic workstation is used to display routed exams.
A routed exam is available for display when the RC (Remote Cache) column in a
VistARad exam list contains the destination name established for your site.
Values in the RC column are based on the
SITE
field in the sending site’s
NETWORK
LOCATION
File (#2005.2).
When VistARad is used at a site that is the source of routed exams, the RC column
can be used to determine which exams have been routed, and where they have been
routed to.
When VistARad is used at a site that is the destination of routed exams, users will
need to log into the sending site’s VistA system. After logging in, VistARad will
automatically filter exam lists to include only routed exams (this filter can be removed
if desired; see the next page for details).
Detailed steps for displaying routed exams are on the next page.
April 2006
VistA Imaging V. 3.0, Patch 18
59