Venturer CD2088 - Manual (Page 12)

- E12 -
COMPACT DISC PLAYBACK (CONTINUED)
Notes:1. During playback, disc tray can be opened to change/add disc and the current disc playback
will not be interrupted but DISC SKIP button will become invalid.
2. The / SKIP buttons can only be used to choose a track of the current disc. To choose
a track of another disc, DISC SKIP button should be pressed to get to the desired disc first.
3. Before transporting the unit, take out all discs from the CD tray.
To Locate a Particular Point in a Track
• To move forward at high speed, keep
forward SEARCH button pressed and release
it at the desired point.
• To move backward at high speed, keep
backward SEARCH button pressed and release
it at the desired point.
• On forward search the track is rapidly scanned,
then the next track and so on to the next disc.
The first track on the next disc will be played
normally, to carry on scanning release and
press the SEARCH button.
LOCATING A PARTICULAR POINT IN A TRACK
To Locate a Track in Sequence
• To locate the beginning of the current or
t h e p r e c e d i n g t r a c k , p r e s s r e v e r s e
SKIP button.
• To locate the beginning of the succeeding
track, press forward SKIP button.
• A short period of time will be needed for the
disc to read the information of the desired
track before playback can begin.
Reverse Forward
search search
Reverse Forward
skip skip
Press it once
Note: Searching and skipping can be done during playback and pause stage but are effective for the
currently selected disc only.
Use DISC SKIP button to choose another disc.
Keep it pressed
2088_eng2.PMD 10/29/2004, 2:55 PM 12