Vizio VP422 HDTV10A - Manual (Page 25)

VIZIO VP422 HDTV10A User Manual
Version 5/29/2008 25
www.VIZIO.com
2.7 2.7 2.7 2.7 Connecting an external Receiver/Amp Connecting an external Receiver/Amp Connecting an external Receiver/Amp Connecting an external Receiver/Amp
2.7.1 2.7.1 2.7.1 2.7.1 Optical Output of Audio Optical Output of Audio Optical Output of Audio Optical Output of Audio received with HD received with HD received with HD received with HD
Programs Programs Programs Programs
If your sound system has a SPDIF (optical) audio input you can connect it to the OPTICAL AUDIO OUT
(white area) at the rear of the PLASMA HDTV. This is active when receiving digital audio with the
program being viewed no matter what input (TV, AV, Component or HDMI) is being used.
1. Turn off the power to the PLASMA HDTV and Receiver/Amp.
2. Using an audio cable (optical cable), connect the cable to the
audio input connector on the Receiver/Amp and connect the other
end to the OPTICAL OUT (white area) audio connector at the rear
of the PLASMA HDTV.
3. Turn on the power to the PLASMA
HDTV and Receiver/Amp.
4. Then press the MENU button on the
remote control to open the On-Screen
Display (OSD) menu.
5. Press the on the remote control to
select the Audio menu.
6. Press the on the remote control to
select SPEAKERS.
7. Press the on the remote control to
select OFF so that the sound from the
PLASMA HDTV will now be routed through your Receiver/Amp system.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task
has been completed.
Note:
a) Refer to your Receiver/Amp user manual to select the corresponding audio input.
b) The audio output can not be connected directly to external speakers.