VOSONIC GV6200 - Manual (Page 19)

Frequently Asked Questions
Problem Solution
The status indicator LED
is not lit It may be caused by faulty power adaptor
or hardware failure.
Lower frame rate than
expected. It may be caused by e.g kind of SD card
and its manufacturer.
Faulty power adapter Check you are using GV6200 power
adapter
Image too dark or too
light Camera incorrectly configured on your
workstation
The system does not
react when buttons are
press. Please press the reset button to recover
the unit.
Motion Detection
triggers unexpectedly Motion detection is based upon changes
in luminance in the image. This means
that if there are sudden changes in the
lighting, motion detection may be
triggered mistakenly. Lower the
sensitivity setting to avoid problems with
luminance.