VIEWSONIC VS12119-1M - Manual (Page 19)

Getting Started
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic 12 N2690w
Rear View of the Product
Item Description
1 Power (AC input) Plug-in the supplied AC Power cord and connect to the
AC input power source.
2 TV Input Jack Connect this jack to your Cable or VHF/UHF antenna
YPbPr Audio input
(left/ right) Connect the Audio in cable for YPbPr from this jack to
the corresponding connectors on your A/V device 3
YPbPr signal input Connect this jack to the YPbPr output of A/V device.
4 SPDIF Connect to a Digital Audio device.
PC Audio input Connect the RGB Audio Out on your computer to the
RGB Audio on the rear of the LCD TV display. This
jack is used for both PC Audio and DVI Audio input. 5
VGA signal input Connect a 15-pin D-sub RGB cable to the RGB output
of your computer and the other end to the RGB input
on the rear of the LCD TV display.
S-Video input Connect the S-Video cable from the compatible device
to this connector on the rear panel of the LCD TV
display.
Composite Video
input
Connect this jack to the composite video output
connectors on your A/V equipment.
6
Composite/ S-Video
Audio input
(left/ right)
Connect the Audio in cable for AV/ S-Video from this
jack to the corresponding connectors on your A/V
device
7 HDMI Input Connect this port to the HDMI/HDMI-DVI jack of the
compatible equipment.