Vantec eSATA PCI & PCI-E Card & CardBus - Manual (Page 5)

2. Specifications/Features:
SATA/eSATA PCI Host Controller (UGT-ST300):
Specifications:
•
Interface: 32-bit 33/66 MHz PCI v2.2
• Connections: 1x Internal SATA port
1x External SATA (eSATA) port
• Dimensions: 120mm x 50mm x 13mm (Not including mounting plate)
Features:
•
Easily add SATA/eSATA to any system with an open PCI slot.
• Transfer Rates Up to 1500Mbps (150MB/s).
• Supports Hot-swapping: Plug and play without rebooting!
• LED drive activity header for each port.
SATA/eSATA PCI-Express Host Controller (UGT-ST400):
Specifications:
•
Interface: PCI-Express 1x 2.5Gbps
• Connections: 1x Internal SATA-II port
1x External SATA-II (eSATA) port
• Dimensions: 90mm x 68mm x 13mm (Not including mounting plate)
Features:
•
Easily add SATA/eSATA to any system with an open PCI-Express slot.
• Transfer Rates Up to 3000Mbps (300MB/s).
• Supports Native Command Queueing (NCQ)
• Supports Hot-swapping: Plug and play without rebooting!
• LED drive activity header for each port.
2-Port eSATA PCMCIA CardBus (UGT-CB350):
Specifications:
•
Interface: 32-bit PCMCIA CardBus
• Connections: 2x External SATA (eSATA) port
• Dimensions: 115mm x 54mm x 16mm
Features:
•
Easily add eSATA to any system with an open PCMCIA slot.
• Transfer Rates Up to 1500Mbps (150MB/s).
• Supports Hot-swapping: Plug and play without rebooting!
Specifications/Features
3